How to move a upright piano

Pianos consistently make movers yearly list of items that are most regularly damaged. Grand pianos are especially bothersome. Practicing the following treatments for taking apart, cushioning and packing grand pianos will avoid damage, lower claims cost, and enhance client satisfaction.

1) A minimum of three individuals are needed to deal with a child grand piano. If the baby grand piano requires to go up or down stairs or if a complete or concert grand piano needs to be carried, a minimum of four people are required.

2) Always complete a accurate and extensive inventory. It may be needed or more effective to utilize a visual stock to properly explain and reveal pre-existing damage.

3) As numerous parts are disassembled, please place all hardware in an appropriately identified parts bag and after that place the parts bag in a "Parts Box".

4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furniture pad.

5) Detach the cover by eliminating the hinge pins. Wrap the lid in a clean furniture pad.

6) Get rid of the prop that holds the cover open and wrap it in a tidy furniture pad. The prop has a hinge pin and is in 2 pieces.

7) Get rid of the pedal assembly and wrap it in a tidy furniture pad. When eliminating the screws, please be mindful not to drop the braces. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by putting a piece of masking tape with the proper number on each rod.

8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from flopping open while you deal with the piano. Cover the top of the piano with 2 tidy furniture pads, neatly folded around the keyboard. Use elastic band to protect the pads. Keep in mind: Please ensure that the surface of the piano is dust-free before padding it. Padding a highly polished surface that is dirty might trigger fine scratches, particularly on a black lacquer finish.

9) Position a piano board and attach the straps so that it is prepared to receive the piano. The raised brace on the piano board should be at the keyboard end of the piano.

10) Remove the left front leg by placing someone beneath the piano at the left end of the keyboard. The other two people ought to support the left front corner. The person beneath the piano must turn the maintaining block so that the long end points far from the leg. The screws, if there are any, must then be eliminated. The "underneath" person needs to then extricate the piano before in fact eliminating the leg. Be sure to have 2 people raising the corner of the piano while the 3rd person gets rid of the leg. Note: Please make certain to note which legs were gotten rid of from which positions considering that some pianos have legs that are not interchangeable.

11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please make certain to lift the entire piano somewhat while finishing this maneuver to prevent unnecessary pressure on the staying, connected legs as the piano tips. Lift the piano to an upright position on the board. Note: Please guarantee that the soundboard is safe prior to lifting. Make sure that the read review piano is centered snugly against the brace at the end of the piano board. Note: Never leave the piano unattended. Always have at least a single person holding the piano constant at all times.

12) Remove the 2 staying legs and wrap them in clean furnishings pads. These legs are kept in location by a "essential and slot" arrangement. To remove the leg, slide it inward towards the center of the piano up until it comes out of the slot.

13) Secure the piano to the piano board by bringing the ends of the straps together and attaching them. Place folded burlap pads over the furniture pads however under the straps to supply additional protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.

14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for defense versus residence damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the top end of the piano board to avoid the piano from slipping.

16) To load the piano, leave it on the piano board and location it in a tier as the first base product with the keyboard facing the wall of the preceding tier. The very best place to pack the cushioned lid is between the piano and the preceding tier or in between the piano and the wall.

Grand pianos represent a significant challenge, they can be moved without damage by utilizing typical sense and practicing the treatments listed above.

Leave a Reply

Your email address will not be published. Required fields are marked *